Actions and Detail Panel
Basic Woodworking with Marc Reeve-Newson
Sat, 18 February 2017, 10:00 AM – 6:00 PM EST
If you're afraid of any of the big, loud, finger-severing tools downstairs this is your chance to learn to use them safely and make something practical at the same time.
The goal of the class is to learn how to use common power tools and explore basic woodworking joints (miter, rabbet, and dado). Your end goal is to create a lidded box with internal dimensions of 3" x 3" x 4" that you'll be able to cherish forever (or hide in shame, but hey, the point of the class is to learn to use the tools). We'll start by learning how to use the planer and jointer to take a piece of rough lumber and turn it into a usable board. You'll then use the table saw, chop saw, and router to shape those pieces, and finally the brad nailer, clamps, and glue to put it all together. If there's enough time you'll be able to sand down your creation, add some detailing with the router, and oil it. This is a full day course, so expect to sweat. And you'll get lots of hands-on time with all the tools. We'll be taking a lunch break around 1:00.
We'll cover basic safety do's and don't's. Please be sure not to wear loose clothing or open toed shoes, and long hair must be tied back. You can choose to make your box from ash, cherry, or walnut. This course will also get you familiar with and certified to use most of the woodworking tools at Site 3.
From Jane T, who took the class in May:
'Thanks to Marc's expertise, my friend and I both made our beautiful wooden boxes, just large enough to hold a weeks worth of chocolate or in my case, all the spare keys that get misplaced around the house. We were instructed on the safe use of several pieces of machinery (at least 7), how to measure and set up the equipment for accurate results. What a fun and exciting experience. Would love to return to make another box from a different type of wood or become a member to create one on my own'
If you're curious about Site 3 please stop by for our weekly Open House every Thursday evening more info at www.site3.ca
After making their box some students use the laser cutter to engrave it. (But that's a seperate course.)