Actions and Detail Panel
DIY Reclaimed Wood Table - The Shop Class Sessions
Sun, 7 May 2017, 9:00 AM – 5:00 PM PDT
The Wood Shop Sessions "Build your Own Table"
In one 8-hour day, you will construct from start to finish, your own rectangular or square single surface with a base for use as a table, coffee table, desk, or other unique use you have in mind.
Working with an experienced facilitator and Wood Working Educator you learn how to use a variety of tools such as a finishing nailer, cordless drill, screw gun, pipe clamps, belt sander, orbital sander, and numerous other hand tools. No experience required!
Gain knowledge and hands-on experience about wood species and woodworking and finishing techniques.
Learn about upcycling techniques and get tips on other ways you can integrate the ethics of reuse into your life.
Choose from 3 rectangular/square table top designs and a unique base of your choice!
*See the options we have for bases below. Special requests for bases will be assessed on a case by case basis. For custom bases other than the ones provided, there is an additional charge.
*Harvest ( Horizontal Plank - Full length or cladded)
*Vertical inlay with frame
Visit our Sessions Gallery to see examples and select the design of your choice. Click the link below.
We will help you build your project from start to finish using pieces that have been prepared for you according to your preferences and submitted design specs.
Upon registering we will send you an order confirmation and begin working with you to plan what you would like to build, choosing a style, height, base and finishing preference!
*Other designs may be considered and will need to be discussed with the facilitator at least 1 week ahead of the Session to make sure that it is the right fit for the Session and your skill set.
Send us your design questions to email@example.com
We can offer a variety of bases to meet your style and price point needs
The tables bases are prepared in advance by the facilatator.
a). 4 Wooden Tapered Legs - A very economical price point. There is no additional cost for these legs other than the material cost.
b). 2 Rectangular Wooden Legs - A very economical price point and is included in the cost of your wood material for the work shop. Additional $ 20.00 fee for the construction of the legs by Wood Shop
c). Metal Pipe Base - Price varies depending on the size of legs and complexity of style you choose. For example, the use of a cross bar or no cross bar etc. A basic table base with 4 pipes and a flanged base is $ 225. One week notice is required to have available at the work shop. They can be ordered closer to the time but may not be available at the time of the work shop.
d). Hair Pin legs ( a set of 4 ) start at $ 350. These need to be special ordered and take a minimum of 2 weeks to produce.
e). Metal Rectangular legs ( A set of 2 ) start at $ 550. These need to be special ordered and take a minimum of 2 weeks to produce.
f). Other bases may be considered, this includes customer supplied legs, and will need to be discussed with the facilitator in advance of the Session. For special base requests after the 1 week window has closed, there may be an additional wait time following the Session before your table will be ready. Custom bases will be in addition to the Session Fee and Material Costs. Send information for an estimate to firstname.lastname@example.org
IMPORTANT INFORMATION ABOUT PRICING, MATERIAL FEES & ADDITIONAL COSTS
The Shop Class has a base rate of $ 165.00 + Taxes.
MATERIAL COSTS FOR LUMBER USED TO MAKE YOUR TABLE IS ADDITIONAL on top for the Session Fee of the $165.00
Wood Shop will supply all of the materials you will need to complete your project.
Cost for material would typically range from $50-$100. For example the average cost of material for a table measuring 48” x 24”, with four wooden legs, is $50. The cost of the material is based on the size of the table you build.
A material fee estimate can be provided upon submission of your specs should you submit a request. Otherwise an invoice will be emailed to you upon completion of the Shop Class Session, payment is required before you can pick up your table the following week. Payment options include, cash, cheque, credit card or e-transfer.
When can I take my table home or have it delivered?
One week following your Session. This allows for the finish to properly cure and for the legs to be attached to the base.
What is the cost for delivery?
$30 Monday to Friday 9am - 5 pm
$50 After 5 pm and on Weekends
In other areas such as North/West Van, Richmond, New West etc, please send us a request for a delivery quote.
What is the maximum size of table that I can make during one 8 session?
65" Long x 35" Wide.
This allows for enough room for all of the participants! Tables over this size also take longer than 8 hours to make!
*If you want to make a table longer than 65" please get in touch with us to book a private Session.
What does the $165.00 Session Ticket include?
When you purchase a Session ticket it is for ONE participant and covers the cost of the facilitation and time in the Shop. Material fees are additional and depend of the size of the item that you build and the wood species used.
Can I bring an extra person to the Session?
The answer is YES as long as we have the space. We have 3 spots available for additional participants. Please purchase the Add an Extra Person ticket on EventBrite. Or we can add it to your Material Fee invoice. We need to know in advance if you will be bringing an additional person to the Session. This allows to staff the event properly and to have enough tools and safety equipment for everyone.
What type of Wood is used?
We use rustic reclaimed Pine. Should you like to inquire about other types of wood such as cedar, maple or fir please ask as we may have the supplies to accommodate the request.
What are my transport/parking options getting to the event?
We have ample free parking outside of the Shop. The location is within walking distance of the Main St. Skytrain Station and bus routes.
Is my registration/ticket transferrable or refundable?
Refunds and Date Transfers: Refunds and or Date Transfers will not be issued within 10 days of the Shop Class Session. See below for additional options.
Transfer of Ticket : We want to make your experience with our Shop Class sessions a positive one, so we allow the transfer of a Shop Class ticket in the event that you can't make it. You may transfer your ticket to another person and they can submit a new design by the Wednesday prior to the Shop Class Session. You may also transfer your ticket to another attendee up until the Session date, but we will not be able to alter the design specs submitted.
Pay it Forward: You can't make it to your Shop Class Session and you want to Pay it Forward by donating your spot to a person in the community who has given back to the community through volunteering or who may not otherwise be able to afford to attend a Shop Class Session.
For all other questions related to our DIY Sessions, send us an email to email@example.com